Cisco Certified Entry Network Technician (ICND1 Exam)
5-Day Course Description Cisco® CCENT 100–101
Todd Lammle Newest Authorized Cisco® CCENT Bootcamp (exam 100–101) is now available, delivered by CCSI instructor Todd Lammle.
In March, 2013, Cisco® announced a revision to the existing CCNA and the introduction of a brand-new CCNA Routing and Switching (R/S) certification, as well as the CCENT being a pre-requisite for achieving other Cisco® certification, such as Voice and Wireless. GlobalNet Training is now delivering a brand new 5-Day CCENT course complete with Todd Lammle curriculum, a brand new, state-of-the-art equipment topology, exam voucher, and onsite testing.
Cisco® Certified Entry Network Technician (CCENT Test 100–101)
The new Cisco® Certified Entry Network Technician (CCENT) certification is not as easy as it sounds, nor is it close to the older pre-2013 tests – this new exam is 100% harder. The new CCENT at GlobalNet Training is a whole new course and exam, and Todd Lammle has everything you need to be successful and learn the foundation of the objectives. This course is not an exam cram, but a full course based on Todd Lammle’s past successes in classes that he’s held for more than a decade. Lecture, hands-on labs, troubleshooting labs, written labs, and reading are all used to build a strong foundation that you need to be successful in the class, the exam and in your career. Our repetitive hands-on labs feature individual student pods with Cisco® high-end ISR routers and Catalyst switches.
GlobalNet’s 5-day, 12-hours long, CCENT boot camp will provide you with everything you need to be successful in a Cisco® routing and switching environment and to pass the new Cisco® Interconnecting Cisco® Networking Devices Part 1 (ICND1) test 100–101) certification exam.
We do not rely on outdated third party test preparation material or courseware. We have been writing our own curriculum since our company began delivering boot camps in 1997. Todd Lammle wrote the material used in class and updates it before each course, and of course we use Todd Lammle’s Sybex Study Guides in class!
GlobalNet’s CCENT course offers high levels of classroom participation, interaction and collaboration:
- Personalized study plan created by Todd Lammle for each student
- 5-night stay in Luxury Hyatt Regency hotel
- Hot chef prepared breakfast and lunch
- Onsite testing with exam voucher included!
- 24 hour instructor availability
- Guaranteed Todd Lammle Instructor
- Todd Lammle’s newest Sybex CCENT Study Guide for test 100–101
- Todd Lammle Online Assisted Learning CCENT Course Modules
- Todd Lammle Online CCENT/CCNA Video Modules
- Todd Lammle Authorized Custom Cisco® courseware
- Real world labs, on real equipment, written by a real world fortune 500 employee and consultant for over 30 years!
- 4 Routers Per Student Pod — No sharing of equipment!
- 2 Switches, including Cisco®’s newest Catalyst Switch, Per Student Pod
- 200 Electronic Flash Cards
- Over 500 Practice Questions on CD
- Written Labs with over 400 questions for use during and after class
- More than 35 Hands-On labs written by Todd Lammle utilizing the latest Cisco® Routers and Switches — repetition of labs is key to success in class!
- Practice questions, study software, router simulator, and more!
- Test Voucher Included
- Onsite Testing in the Dallas location
- Course Guarantee!
Cisco Certified Entry Network Technician (ICND1 Exam) Upcoming Dates
Free Rack Time
This course now includes two free weeks of rack time!
Sign up for any GlobalNet Cisco CCNA or CCENT class and receive two free weeks of online rack access using three routers!
You will receive access to the following network using step-by-step hands-on labs written by Cisco author and GlobalNet Training CEO Todd Lammle.
Understanding how to configure routers and switches is important, and GlobalNet’s Cisco students gain that experience by training on 4 Routers and 2 Switches, including the Cisco Catalyst Switch series and the brand new Cisco ISR Router series, per student pod.
No sharing equipment!
Plus, GlobalNet Training offers more lab time than any of our competitors with over 35 labs!
We encourage students to bring their own laptops to take full advantage of our labs after class each day.
Mandatory Network+ current certification is required in order to obtain the GlobalNet Training class guarantee. Equivalent job experience can be used in place of the Network+ certification.
It is important to understand that even though the name has “Entry” in the title, this is not an entry level course or certification. If you have little or no experience you need to work on your Network+ certification before attending the CCENT class.
The 100–101 Interconnecting Cisco® Networking Devices Part 1 (ICND1) exam is the exam associated with the Cisco® Certified Entry Network Technician (CCENT) certification and is a tangible first step in achieving an Associate-level certification Candidates can prepare for this exam by taking the GlobalNet Training 5-day Interconnecting Cisco® Networking Devices Part 1 (ICND1) v2.0 course. This exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam includes topics on the operation of IP data networks, LAN switching technologies, IPv6, IP routing technologies, IP services (DHCP, NAT, ACLs), network device security, and basic troubleshooting.
Operation of IP Data Networks
- Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs.
- Select the components required to meet a given network specification.
- Identify common applications and their impact on the network
- Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models.
- Predict the data flow between two hosts across a network.
- Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN
IP Routing Technologies
- Describe basic routing concepts
- Packet forwarding
- Router lookup process
- Configure and verify utilizing the CLI to set basic Router configuration
- Cisco IOS commands to perform basic router setup
- Configure and verify operation status of an ethernet interface
- Verify router configuration and network connectivity
- Cisco IOS commands to review basic router information and network connectivity
IP addressing (IPv4 / IPv6)
- Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
- Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.
- Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
- Describe the technological requirements for running IPv6 in conjunction with IPv4 such as dual stack
- Describe IPv6 addresses
- Global unicast
- Link local
- Unique local
- eui 64
IP Routing Technologies
- Configure and verify routing configuration for a static or default route given specific routing requirements
- Differentiate methods of routing and routing protocols
- Static vs. Dynamic
- Link state vs. Distance Vector
- next hop
- ip routing table
- Passive interfaces
- Configure and verify OSPF (single area)
- Benefit of single area
- Configure OSPF v2
- Configure OSPF v3
- Router ID
- Passive interface
- Configure and verify interVLAN routing (Router on a stick)
- sub interfaces
- upstream routing
- Configure SVI interfaces
- Configure and verify DHCP (IOS Router)
- configuring router interfaces to use DHCP
- DHCP options
- excluded addresses
- lease time
- Describe the types, features, and applications of ACLs
- Sequence numbers
- Log option
- Configure and verify ACLs in a network environment
- Log option
- Identify the basic operation of NAT
- 1 to 1
- Source addressing
- One way NAT
- Configure and verify NAT for given network requirements
- Configure and verify NTP as a client
LAN Switching Technologies
- Determine the technology and media access control method for Ethernet networks
- Identify basic switching concepts and the operation of Cisco switches.
- Configure and verify initial switch configuration including remote access management.
- Cisco IOS commands to perform basic switch setup
- Verify network status and switch operation using basic utilities such as ping, telnet and ssh.
- Describe how VLANs create logically separate networks and the need for routing between them.
- Explain network segmentation and basic traffic management concepts
- Configure and verify VLANs
- Configure and verify trunking on Cisco switches
- Auto negotiation
- Collision Domains
- Broadcast Domains
- Types of switching
- CAM Table
Network Device Security
- Configure and verify network device security features such as:
- Device password security
- Enable secret vs enable
- Disable telnet
- Physical security
- Service password
- Describe external authentication methods
- Configure and verify Switch Port Security features such as
- Sticky MAC
- MAC address limitation
- Static / dynamic
- Violation modes
- Err disable
- Protect restrict
- Shutdown unused ports
- Err disable recovery
- Assign unused ports to an unused VLAN
- Setting native VLAN to other than VLAN 1
- Configure and verify ACLs to filter network traffic
- Configure and verify an ACLs to limit telnet and SSH access to the router
- Troubleshoot and correct common problems associated with IP addressing and host configurations.
- Troubleshoot and Resolve VLAN problems
- identify that VLANs are configured
- port membership correct
- IP address configured
- Troubleshoot and Resolve trunking problems on Cisco switches
- correct trunk states
- correct encapsulation configured
- correct vlans allowed
- Troubleshoot and Resolve ACL issues
- Permitted networks
- Troubleshoot and Resolve Layer 1 problems
- Dropped packets
- Late collision
- Input / Output errors
- Review and test at 1pm — Class is concluded by 4:00pm CST
|Required Exam(s)||Recommended Training|
|100-101 ICND1||GlobalNet Training Interconnecting Cisco Networking Devices Part 1 (ICND1) v2.0|
The Interconnecting Cisco Networking Devices Part 1 (ICND1) 100-101 exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small branch network, including basic network security.
The Interconnecting Cisco Networking Devices Part 1 (ICND1) 100-101 exam is offered onsite on the last day of class in Dallas if you are ready. If you choose not to take the exam on that Friday afternoon, a voucher will be emailed to you upon your request.
The Lammle Training Guarantee is subject to the following terms and conditions:
(i) You must notify GlobalNet Training in writing and provide proof of having not passed an applicable professional certification examination within 10 days (two business weeks) following the last day of the Bootcamp you attended; (ii) Your participation in a subsequent Bootcamp under this Guarantee is based on seat availability in a regularly scheduled, open enrollment Bootcamp; (iii) Except for your Bootcamp tuition and enrollment fees you are solely responsible for all costs and expenses incurred in attending a Bootcamp under this Guarantee, including all travel, lodging, meals and other out-of-pocket expenses, such as exams, associated with your participation in such Bootcamp; and (iv) Only individual (single) registrations are eligible to participate under this Guarantee. This Guarantee does not apply to custom or corporate block purchases.